Hydraulic lifts are widely used in factories, warehouses, industrial plants, institutions—anywhere products or supplies need to be moved from one level to the other.
Guide rail lift provides fast, efficient, convenient and safe access to mezzanines, balconies, basements, and any levels in the multi-storied building. The freight elevator can be installed indoor and outdoor.
Hydraulic goods elevator not only have all safety devices of the traditional lift but also have the following unique system:
1. Spillover valve: it prevents high pressure when the machine moves up.
2. Manual emergency valve: it can go down to the nearest floor and open the door in case of any emergency.
3. Manual pump: it can go down to the nearest floor and open the door in case of any accident.
4. Pipe fracture valve: when the hydraulic system pipe breaks, it can cut down the channel of the oil to stop the falling.
Even though it is widely used in modern construction, it has a huge size and is so heavy that its safety performance requirements are very high in the construction. General requirements for safety rope fall under the following three areas.
1. Replacing the wire rope: damaged wire rope should be replaced to prevent accidents.
-Truncation bit off both sides of the rope should be knotted securely to prevent after cutting loose strands.
2. Do not overload the lift: there should be overload limiter or torque limiter installed. It should also be installed from the ceiling position to prevent excessive volume to pull off the rope.
3. The new rope should be replaced with the same type and size of the original installation of the rope.
If you use a different type, ensure that the new rope is not less than the old rope performance, and can match with the drum and pulley groove.
Rope twist should be consistent with the direction of the spiral groove rope reel. Single winding rope guide should be set up to prevent chaos rope.

Cargo elevator is widely used in a warehouse. Many suppliers will receive tons of requests from customers, so, how to make a good cargo elevator?
Some suggestions are as follows.
1. A good cargo elevator has an emergency decline. If an operator encounters an emergency, can he or she make the cargo lift go down by a certain button?
2. Chain model: the chain model of a good cargo lift will change according to the cargo elevator, load capacity, and lift height.
3. Interlock: if the platform door is open, the elevator will stop working.
4. Hydraulic cylinder: it should have an anti-explosion valve in the cylinder. If the oil tube has a breakage, the valve will block the oil.
5. If the cargo elevator is installed outdoors, the painting should be of high quality that can last.

Cargo lifts are widely used in most warehouses. The main cargo lift includes stationary Scissor lift and lead rail lift. It is important to note that the lead rail lift does not need depth pit, and it is highly popular than the scissor cargo lift.
The lead rail cargo lift has three kinds of installation. One is installed on the ground, and the ramp is added for easy loading and unloading cargoes. The other installation is fixed on the ground directly.
The last is pit installation. Our customer has the freedom to choose a suitable cargo lift according to his or her needs.
Best of all, the lead rail lift is frequently purchased by a dozen of clients since 2014. This is because the product is of good quality.
It is meticulously painted, durable, safe to use for your needs. Also, the lead rail lift is highly dependable because of its incredible service to most of the customers. The machine is affordable for everyone.

1.Before operating a cargo lift, kindly check the following:safety rope, hydraulic oil pipe, electric connection, limit switch, emergency stop. Also, confirm if the elevator is working and finally operate it.

2.Goods to be transported should be in the center of the cargo lift, and should not exceed lift’s platform. The platform door of a cargo lift prevents the goods from being thrown out during lifting up and down.

3.Only a professional worker should operate the cargo lift.

4.If you get into some mechanical problems, immediately stop operating the cargo lift. The mechanical problems include the following:

A. Goods lift for sale not lifting up or down.
B. Cargo lifts lifting up and down with intense vibration and noise.
C. Any other person operating the lift should be alert in case of these emergencies.

Optional suggestion

1. Add the overload warning.
2. Include a mesh cover for Cargo lift
3. Include anti-fall device which will prevent cargo slipping.
4. Have a platform guide rail door with interlock.

The vertical cargo lift is an excellent machine for you, we produce according to our customer needs, like platform size, load capacity, and lifting height.
There are two installation ways for a vertical cargo lift. Directly install on the ground and fix in a pit. Normally the depth of a pit should be 20mm. You could correctly install the lift.

The cargo lift can be fixed on the ground floor or into one pit. If it’s on the ground floor, the user is recommended to prepare one ramp to move freely. One pit prepared will be better, which enables the work platform to be in level with the ground. Absolutely no ramp needed.
To prepare one pit, below are some of the advice for your reference:
Foundation:
1. Pouring concrete (C30) should be 400mm in depth.
2. Embedded angle made of steel should be 50 by 50 by 5mm to ground the foundation.
3. The embedded conduit between power supply and foundation should be determined keenly.
Remarks:
Pit size: This item is based on the user’s request for platform size.
1. Ensure the platform level is okay when concreting.
2. The size of the hole should be kept straight with the ground hole being vertical.
3. Size of the embedded part should be 1600 by 400 by 14 in millimeters.
4. Put the entrenched part into foundation when concreting, at the side of the lead rail for fixation.
5. Keep the foundation dry; if wet or water comes in accidentally, please make one drainage pipe.